TM 5-3810-306-34
2. INSTALL EXTENSION CYLINDER (3).
a. Start cylinder into beam and connect hydraulic
hoses (4) with new packings (13) to fittings (12)
as marked during removal.
b. Push cylinder into beam until rod end aligns with
mounting lugs.
c.
Coat clevis pin (1) with Never-Seeze and install
pin and new cotter pin (2) securing extension
cylinder (3) rod.
3. INSTALL OUTRIGGER BEAM. (REFER TO PAGE
4. EXTEND AND RETRACT EXTENSION CYLINDER
AS DESCRIBED UNDER OUTRIGGER BEAM
INSTALLATION.
END OF TASK
11-10