TM 5-3810-306-34
OUTRIGGER EXTENSION CYLINDER ASSEMBLY
TOOLS: General mechanic's tool kit: automotive (5180-00-177-7033)
Shop Equipment Auto-Maintenance and Repair, FM Basic (4910-00-754-0705)
Shop Equipment Auto-Maintenance and Repair, FM Suppl No. 1
Tool Outfit Hyd System, Test and Repair, 3/4 Ton Trailer Mtd
SUPPLIES:
Parts kit (Item 58, Appendix B)
Loctite # 271 (Item 23, Appendix B)
NEVER SEEZ (Item 24, Appendix B)
Hydraulic oil (Item 8, Appendix B)
Solvent (Item 1, Appendix B)
EQUIPMENT CONDITION: Outrigger extension cylinder assembly removed.
(Refer to page 11-8.)
DISASSEMBLY:
CAUTION
NOTE
Exercise extreme care when handling
or setting down cylinder rod.
Any
maintenance
requiring
Damage to rod surface may cause
disassembly of cylinders should be
unnecessary
maintenance
and
accompanied by replacement of all
expense.
cylinder seals.
b. Unscrew lock ring (5) and withdraw cylinder rod
assembly from barrel.
1. DRAIN THE OIL FROM THE CYLINDER.
NOTE
2. REMOVE CYLINDER ROD ASSEMBLY FROM
BARREL (14).
Cover cylinder barrel opening to
a. Remove setscrew (3) securing lock ring (5) to
preclude contamination from dust
barrel (14).
and dirt.
WARNING
3. DISASSEMBLE ROD ASSEMBLY.
Do not use air pressure to remove
CAUTION
cylinder rod assembly. Use only a
source of controlled hydraulic oil
When removing seals (12) and rings,
pressure if rod assembly is hard to
avoid scratching grooved and gland
move.
surfaces.
11-11
