TM 9-3950-253-13&P
0036
CORRECTIVE ACTION - Continued
9.
Set battery disconnect switch and ignition switch to ON position.
a.
If error code is not displayed, replace LH twistlock sensor harness (WP 0070).
b.
If error code is still displayed, proceed to Step 10.
10.
Set ignition switch and battery disconnect switch to OFF position.
11.
Disconnect wires from positions 1, 2 and 3 on P10 in stowage MUX box (control panel).
12.
Set battery disconnect switch and ignition switch to ON position.
a.
If error code is not displayed, replace RH twistlock sensor harness (WP 0070).
b.
If error code is still displayed, replace stowage MUX box (WP 0070).
END OF WORK PACKAGE
0036-2
03/15/2011Rel(1.10)root(tswp)wpno(T582035)