TM 9-3950-253-13&P
FIELD MAINTENANCE
NO STOWAGE FUNCTION - ERROR CODE 30
INITIAL SETUP:
Tools and Special Tools
Equipment Condition
Tool Kit, General Mechanic s (WP 0118, Table 2,
Vehicle parked on level ground, in neutral gear
Item 2)
with parking brake applied
(PLS: TM 9-2320-364-14&P,
HEMTT: TM 9-2320-326-14&P)
References
NOTE
When ignition switch is turned on after battery disconnect switch has been turned off and
back on, error codes 1 and 24 may alternately display for one minute. This error code
indicates that temporary settings were lost while battery disconnect switch was off, and is
consistent with normal operation.
TROUBLESHOOTING PROCEDURE
SYMPTOM
ERROR CODE 30
MALFUNCTION
Faulty stowage latch harness.
CORRECTIVE ACTION
1.
Set ignition switch and battery disconnect switch to OFF position (PLS: TM 9-2320-364-14&P,
HEMTT: TM 9-2320-326-14&P).
2.
Disconnect stowage latch harness from valve (WP 0067).
3.
Set battery disconnect switch and ignition switch to ON position.
a.
If error code is not displayed, replace valve (WP 0067).
b.
If error code is still displayed, proceed to Step 4.
4.
Set ignition switch and battery disconnect switch to OFF position.
5.
Disconnect wires 1 and 2 from P3 in relay box.
6.
Set battery disconnect switch and ignition switch to ON position
a.
If error code is not displayed, replace stowage latch harness (WP 0070).
b.
If error code is still displayed, replace relay box (WP 0070).
END OF WORK PACKAGE
0037-1/blank
03/15/2011Rel(1.10)root(tswp)wpno(T582036)