TM 9-3950-253-13&P
0064
REMOVAL - Continued
NOTE
Tag hydraulic hoses to aid in installation.
Place a drain pan under components as required to catch any draining hydraulic
fluid.
Cap hoses and fittings to prevent contamination.
1.
Remove two hydraulic hoses (Figure 1, Item 7) from stowage cylinder (Figure 1, Item 5).
2.
Remove snap ring pin (Figure 1, Item 4) and retaining pin (Figure 1, Item 3) from stowage cylinder (Figure 1,
Item 5).
3.
Remove snap ring pin (Figure 1, Item 2), stowage cylinder (Figure 1, Item 5), and cylinder bearing (Figure 1,
Item 6) from stowage assembly (Figure 1, Item 1).
Figure 1. Stowage Actuator.
END OF TASK
CLEANING AND INSPECTION
Clean and inspect all parts IAW (WP 0061), General Maintenance Instructions.
END OF TASK
03/15/2011Rel(1.10)root(maintwp)wpno(M582063)