TM 9-3950-253-13&P
0086
REMOVAL - Continued
HEMTT Stowage Control Unit and Bracket Removal
1.
Remove two locknuts (Figure 2, Item 4), washers (Figure 2, Item 3), bolts (Figure 2, Item 1), washers
(Figure 2, Item 2), and stowage control unit bracket (Figure 2, Item 7) from hydraulic control bracket
(Figure 2, Item 9). Discard locknuts.
2.
Remove four bolts (Figure 2, Item 5), washers (Figure 2, Item 6), and stowage control unit (Figure 2, Item 8)
from stowage control unit bracket (Figure 2, Item 7).
Figure 2. HEMTT Stowage Control Unit Removal.
PLS Stowage Control Unit and Bracket Removal
NOTE
Perform steps 1 and 2 for PLS M1075 Trucks.
Perform steps 3 thru 5 for PLS M1075A1 Trucks.
1.
Remove two locknuts (Figure 3, Item 8), washers (Figure 3, Item 7), bolts (Figure 3, Item 5), washers
(Figure 3, Item 6), and stowage control unit bracket (Figure 3, Item 1) from platform (Figure 3, Item 9).
Discard locknuts.
2.
Remove four bolts (Figure 3, Item 4), washers (Figure 3, Item 3), and stowage control unit (Figure 3, Item 2)
from stowage control unit bracket (Figure 3, Item 1).
03/15/2011Rel(1.10)root(maintwp)wpno(M582085)
